v1.0, May 12, 2002
Revision History |
---|
Revision 1.0 | 2002-05-12 | Revised by: aa | first release |
You can transparently bridge traffic between 2 ethernet LANs to unite them, if both of them are connected to Internet. There is no way to do a "real" bridge, you can only bridge third level protocols, which linux knows how to route, but ethernet traffic with those protocols will seem bridged. You can make 2 ethernet bridges, to bridge IP and/or IPX traffic. You cannot transparently bridge any other third level protocols between distinct LANs. You should read the rest of this document to determine whether you can bridge any other protocol.
If you have:
PC1 (192.168.0.1 /24)--|
PC3 (192.168.0.3 /24)--|
PC5 (192.168.0.5 /24)--|--[ eth0 - bridge_1 - eth1 (195.0.0.1) ]
PC253 (192.168.0.253/24)--|
| (192.168.0.2 /24) PC2
| (192.168.0.4 /24) PC4
[ (192.0.0.1) eth1 - bridge_2 - eth0 ] --| (192.168.0.6 /24) PC6
| (192.168.0.254/24) PC254 |
bridge_1 and bridge_2 are your Linux bridges and externally connected to the Internet interface eth1. So 195.0.0.1 and 192.0.0.1 can be any valid Internet addresses given to you by your ISP. So, you should: Get two linux computers with kernels 2.2 or 2.4. Kernels should be compiled with PPP and Advanced Router. You also need the iproute2 package properly installed. Information on iproute2 can be found in Configure.help of your kernel in the comments under Advanced Router. You also need the following utilities: You can also find them on http://www.freshmeat.net Please, keep in mind that you need special patches for pppd and the kernel if you want to do MS Chap and MS Encryption (MPPE). Refer to the PoPTop manual for instructions on how to get and install these patches. Connect your routers to Internet, or establish any other communication between them with the exception of IP. Make a PPTP tunnel between them. There are example configurations in the PoPToP (server) and pptp (client) manuals. Now you should have two bridges and an IP tunnel between then, possibly encrypted (refer to the PPP manual). Let's configure bridging. Remember that the bridge is really a router, so we need to run the following commands on our bridges (this assumes bridge_1 and bridge_2 are IP addresses, assigned to each end of the PPTP tunnel between bridges): bridge_1$ip route add 192.168.0.2 via bridge_2
bridge_1$ip route add 192.168.0.4 via bridge_2
bridge_1$ip route add 192.168.0.6 via bridge_2
bridge_1$ip route add 192.168.0.254 via bridge_2
bridge_1$ip route add 192.168.0.255 via bridge_2
|
On the other side: bridge_2$ip route add 192.168.0.1 via bridge_1
bridge_2$ip route add 192.168.0.3 via bridge_1
bridge_2$ip route add 192.168.0.5 via bridge_1
bridge_2$ip route add 192.168.0.253 via bridge_1
|
This will tell each of bridges which hosts are on the other side. You can do the same with the old-style route command. It will look like: bridge_1$route add -host 192.168.0.2 gw bridge_2
bridge_1$route add -host 192.168.0.4 gw bridge_2
bridge_1$route add -host 192.168.0.6 gw bridge_2
bridge_1$route add -host 192.168.0.254 gw bridge_2
bridge_1$route add -host 192.168.0.255 gw bridge_2
|
On the other side: bridge_2$route add -host 192.168.0.1 gw bridge_1
bridge_2$route add -host 192.168.0.3 gw bridge_1
bridge_2$route add -host 192.168.0.5 gw bridge_1
bridge_2$route add -host 192.168.0.253 gw bridge_1
|
Please note once more that bridge_1 and bridge_2 are not IP addresses given by your ISP, but IP addresses which you assigned to each end of the PPTP tunnel. Now you have two bridges and each of them knows where to find a particular IP. But how do you tell those computers to send their traffic for the remote network to the local bridge? You need tarpd. tarpd is a very simple daemon, which replies to arp requests for certain IP addresses. You only need to run a tarpd on each bridge, and specify the list of IP addresses found on the remote end. For example, for those two bridges you should run: bridge_1$tarpd eth0 192.168.0.2 255.255.255.255 \
192.168.0.4 255.255.255.255 \
192.168.0.254 255.255.255.255
|
On the other side: bridge_2$tarpd eth0 192.168.0.1 255.255.255.255 \
192.168.0.3 255.255.255.255 \
192.168.0.253 255.255.255.255
|
You specify 128 remote pairs (IP/mask. Mask should be 255.255.255.255 in order not to confuse tarpd!) on each bridge. Enjoy your bridges!
Copyright � 2002 Alexander Alekseev Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
A copy of the license is included in the section entitled "GNU
Free Documentation License".
The purpose of this License is to make a manual, textbook,
or other written document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by
others. This License is a kind of "copyleft", which means that
derivative works of the document must themselves be free in the
same sense. It complements the GNU General Public License, which
is a copyleft license designed for free software. We have designed this License in order to use it for manuals
for free software, because free software needs free documentation:
a free program should come with manuals providing the same
freedoms that the software does. But this License is not limited
to software manuals; it can be used for any textual work,
regardless of subject matter or whether it is published as a
printed book. We recommend this License principally for works
whose purpose is instruction or reference.
This License applies to any manual or other work that
contains a notice placed by the copyright holder saying it can be
distributed under the terms of this License. The "Document",
below, refers to any such manual or work. Any member of the
public is a licensee, and is addressed as "you". A "Modified Version" of the Document means any work
containing the Document or a portion of it, either copied
verbatim, or with modifications and/or translated into another
language. A "Secondary Section" is a named appendix or a front-matter
section of the Document that deals exclusively with the
relationship of the publishers or authors of the Document to the
Document's overall subject (or to related matters) and contains
nothing that could fall directly within that overall subject.
(For example, if the Document is in part a textbook of
mathematics, a Secondary Section may not explain any mathematics.)
The relationship could be a matter of historical connection with
the subject or with related matters, or of legal, commercial,
philosophical, ethical or political position regarding
them. The "Invariant Sections" are certain Secondary Sections
whose titles are designated, as being those of Invariant Sections,
in the notice that says that the Document is released under this
License. The "Cover Texts" are certain short passages of text that
are listed, as Front-Cover Texts or Back-Cover Texts, in the
notice that says that the Document is released under this
License. A "Transparent" copy of the Document means a
machine-readable copy, represented in a format whose specification
is available to the general public, whose contents can be viewed
and edited directly and straightforwardly with generic text
editors or (for images composed of pixels) generic paint programs
or (for drawings) some widely available drawing editor, and that
is suitable for input to text formatters or for automatic
translation to a variety of formats suitable for input to text
formatters. A copy made in an otherwise Transparent file format
whose markup has been designed to thwart or discourage subsequent
modification by readers is not Transparent. A copy that is not
"Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include
plain ASCII without markup, Texinfo input format, LaTeX input
format, SGML or XML using a publicly available DTD, and
standard-conforming simple HTML designed for human modification.
Opaque formats include PostScript, PDF, proprietary formats that
can be read and edited only by proprietary word processors, SGML
or XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML produced by some word
processors for output purposes only. The "Title Page" means, for a printed book, the title page
itself, plus such following pages as are needed to hold, legibly,
the material this License requires to appear in the title page.
For works in formats which do not have any title page as such,
"Title Page" means the text near the most prominent appearance of
the work's title, preceding the beginning of the body of the
text.
If you publish printed copies of the Document numbering more
than 100, and the Document's license notice requires Cover Texts,
you must enclose the copies in covers that carry, clearly and
legibly, all these Cover Texts: Front-Cover Texts on the front
cover, and Back-Cover Texts on the back cover. Both covers must
also clearly and legibly identify you as the publisher of these
copies. The front cover must present the full title with all
words of the title equally prominent and visible. You may add
other material on the covers in addition. Copying with changes
limited to the covers, as long as they preserve the title of the
Document and satisfy these conditions, can be treated as verbatim
copying in other respects. If the required texts for either cover are too voluminous to
fit legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages. If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a publicly-accessible
computer-network location containing a complete Transparent copy
of the Document, free of added material, which the general
network-using public has access to download anonymously at no
charge using public-standard network protocols. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public. It is requested, but not required, that you contact the
authors of the Document well before redistributing any large
number of copies, to give them a chance to provide you with an
updated version of the Document.
You may copy and distribute a Modified Version of the
Document under the conditions of sections 2 and 3 above, provided
that you release the Modified Version under precisely this
License, with the Modified Version filling the role of the
Document, thus licensing distribution and modification of the
Modified Version to whoever possesses a copy of it. In addition,
you must do these things in the Modified Version: Use in the Title Page
(and on the covers, if any) a title distinct from that of the
Document, and from those of previous versions (which should, if
there were any, be listed in the History section of the
Document). You may use the same title as a previous version if
the original publisher of that version gives permission. List on the Title Page,
as authors, one or more persons or entities responsible for
authorship of the modifications in the Modified Version,
together with at least five of the principal authors of the
Document (all of its principal authors, if it has less than
five). State on the Title page
the name of the publisher of the Modified Version, as the
publisher. Preserve all the
copyright notices of the Document. Add an appropriate
copyright notice for your modifications adjacent to the other
copyright notices. Include, immediately
after the copyright notices, a license notice giving the public
permission to use the Modified Version under the terms of this
License, in the form shown in the Addendum below. Preserve in that license
notice the full lists of Invariant Sections and required Cover
Texts given in the Document's license notice. Include an unaltered
copy of this License. Preserve the section
entitled "History", and its title, and add to it an item stating
at least the title, year, new authors, and publisher of the
Modified Version as given on the Title Page. If there is no
section entitled "History" in the Document, create one stating
the title, year, authors, and publisher of the Document as given
on its Title Page, then add an item describing the Modified
Version as stated in the previous sentence. Preserve the network
location, if any, given in the Document for public access to a
Transparent copy of the Document, and likewise the network
locations given in the Document for previous versions it was
based on. These may be placed in the "History" section. You
may omit a network location for a work that was published at
least four years before the Document itself, or if the original
publisher of the version it refers to gives permission. In any section entitled
"Acknowledgements" or "Dedications", preserve the section's
title, and preserve in the section all the substance and tone of
each of the contributor acknowledgements and/or dedications
given therein. Preserve all the
Invariant Sections of the Document, unaltered in their text and
in their titles. Section numbers or the equivalent are not
considered part of the section titles. Delete any section
entitled "Endorsements". Such a section may not be included in
the Modified Version. Do not retitle any
existing section as "Endorsements" or to conflict in title with
any Invariant Section.
If the Modified Version includes new front-matter sections
or appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles. You may add a section entitled "Endorsements", provided it
contains nothing but endorsements of your Modified Version by
various parties--for example, statements of peer review or that
the text has been approved by an organization as the authoritative
definition of a standard. You may add a passage of up to five words as a Front-Cover
Text, and a passage of up to 25 words as a Back-Cover Text, to the
end of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one. The author(s) and publisher(s) of the Document do not by
this License give permission to use their names for publicity for
or to assert or imply endorsement of any Modified Version.
You may combine the Document with other documents released
under this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice. The combined work need only contain one copy of this
License, and multiple identical Invariant Sections may be replaced
with a single copy. If there are multiple Invariant Sections with
the same name but different contents, make the title of each such
section unique by adding at the end of it, in parentheses, the
name of the original author or publisher of that section if known,
or else a unique number. Make the same adjustment to the section
titles in the list of Invariant Sections in the license notice of
the combined work. In the combination, you must combine any sections entitled
"History" in the various original documents, forming one section
entitled "History"; likewise combine any sections entitled
"Acknowledgements", and any sections entitled "Dedications". You
must delete all sections entitled "Endorsements."
To use this License in a document you have written, include
a copy of the License in the document and put the following
copyright and license notices just after the title page: Copyright (c) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with the Invariant Sections being LIST THEIR TITLES, with the
Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
A copy of the license is included in the section entitled "GNU
Free Documentation License".
If you have no Invariant Sections, write "with no Invariant
Sections" instead of saying which ones are invariant. If you have
no Front-Cover Texts, write "no Front-Cover Texts" instead of
"Front-Cover Texts being LIST"; likewise for Back-Cover
Texts. If your document contains nontrivial examples of program
code, we recommend releasing these examples in parallel under your
choice of free software license, such as the GNU General Public
License, to permit their use in free software.
|
|